speed control question
Thread Starter
|
Junior User
Joined: Jun 2003
Posts: 52
Likes: 0
speed control question
Diagnosing a non-working cruise control. (99 F150 XLT M/T)
When I'm checking for power with the switch on, (terminals 5 and 10, right?) should there be power all the time, or only when I have my finger on the switch? That's what I've got. I did the test for the set/accel switch and I get infinite resistance, it's as if I didn't hook up the ohmmeter at all. I'd say that switch is bad, but I'm going to check it where it plugs into the steering column clockspring wiring harness thingy.
Peas out.
When I'm checking for power with the switch on, (terminals 5 and 10, right?) should there be power all the time, or only when I have my finger on the switch? That's what I've got. I did the test for the set/accel switch and I get infinite resistance, it's as if I didn't hook up the ohmmeter at all. I'd say that switch is bad, but I'm going to check it where it plugs into the steering column clockspring wiring harness thingy.
Peas out.
