Monroe Reflex shock question
Thread Starter
|
Freshman User
Joined: Jul 2014
Posts: 45
Likes: 0
From: Germantown, Ohio
Monroe Reflex shock question
I have a 2003 Ford F250 SuperDuty 4wd 7.3L crew cab short bed truck. I believe I have a 2" level/lift kit. My question is can I use the 9111195 & 9111196 Standard length or do I need to get a longer stoke. I have not yet removed my rusted shocks to measure them. Just looking for experience here first!
Thanks
Thanks
Thread Starter
|
Freshman User
Joined: Jul 2014
Posts: 45
Likes: 0
From: Germantown, Ohio
So I got off the lazy train today and removed the bottom bolt from front and rear to measure. I could see through the rust half a number stamped in. So after buffing with a die grinder and scotch bright pad found them to be Monroe-Matic plus 32358 and 32358. So I guess I answered my own question just hope it may help others with similar question later!
Thread
Thread Starter
Forum
Replies
Last Post
