Fuel line problems
Thread Starter
|
New User
Joined: Apr 2018
Posts: 23
Likes: 0
From: Stl mo
Fuel line problems
So the retard before me didn't use the fuel line took to remove the lines from the pump and broke them and had them held on with zipties wtf.... so now my question is how to fix this correctly. I cant seen to find anything as far as a way to replace the clips. Any ideas or suggestions
fyi it's a 2002 f250 v10
fyi it's a 2002 f250 v10
Lead Driver
Joined: Mar 2006
Posts: 6,265
Likes: 438
From: IL
Cross-Country
Joined: Sep 2017
Posts: 63
Likes: 2
From: Ozark, Mo.
Is it the push to lock at sending unit ?
Are they the ones that require the tool to release, or squeeze type to remove ? If so and the housing is what is broken Dorman makes a replacement end that comes with about 16" of fuel line and a barbed splice fitting. Auto Zone stocks them and the oUtley and return are different size. Do a YouTube search to install because they suck, but only cure for bad one. Also Dorman makes a install tool but they weren't able to rent in my area and like 90.00 on Ebay. Line kit was like 23.00 I believe. Good luck
Cross-Country
Joined: Sep 2017
Posts: 63
Likes: 2
From: Ozark, Mo.
I know about tool rental
But both the Auto Zone and O'Reillys where I live didn't have the Dorman install tool.
. That's why I mentioned doing a You tube search as I found a couple vids on both a cold method and also using a heat gun. Still both pretty advanced for most people.
. That's why I mentioned doing a You tube search as I found a couple vids on both a cold method and also using a heat gun. Still both pretty advanced for most people.
Thread
Thread Starter
Forum
Replies
Last Post
Macmathews
1999 - 2003 7.3L Power Stroke Diesel
3
Jul 13, 2016 08:19 PM
Firescu
Fuel Injection, Carburetion & Fuel System
1
Oct 31, 2011 06:19 PM
early
1987 - 1996 F150 & Larger F-Series Trucks
1
Jun 4, 2006 10:43 AM
rsmack
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Oct 20, 2003 02:13 AM
