and hoist and junk the rest.
parts interchangeable?
Thread Starter
|
New User
Joined: Nov 2015
Posts: 22
Likes: 0
parts interchangeable?
Iv got a buddy that had a 69 f600 give to him. He is going to keep the bed and hoist and junk the rest. Im wondering how many parts will interchange with my 67 f350? If enough would i can trade him out of the hole truck. If not im sure i can cherry pick what will.
Thanks
Thanks
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
The engine/transmission/rear axle/front/rear suspension is different as are the brakes and steering.
The hood is the same, but the fenders, grille and etc are not. '69 (1968/72) doors are different, because 1967 F100/750's have one year only doors. Most of the doors internal parts are also different.
More 1967 only: Dash, radio, heater, firewall, brake/clutch pedals, bracket they suspend from under the dash.
Ignition switch, instrument cluster backs, grilles, master cylinders, P/B boosters, brake pressure differential valves and low brake fluid warning lamp switch.
Thread Starter
|
New User
Joined: Nov 2015
Posts: 22
Likes: 0
Cab and door was what i was mosty wondering about.and any interior parts. It got the 331 in it i think so engine and everything elce is useless to me i know. I could get te hole truck for about what a good door would cost so it be worth it if anything much would work. Oh yeah he isnt sure what it is it could b a 500. Iv not seen it yet. frist time he told me about it he was saying it was like a 64/5 so i didnt think anything about it frist.
P.s. i didnt figure i could put a 16 ft grain box and hoist on f350 lol.
P.s. i didnt figure i could put a 16 ft grain box and hoist on f350 lol.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
Cab and door was what I was mostly wondering about, and any interior parts.
It's got the 330 in it I think, so engine and everything else is useless to me I know.
I could get the whole truck for about what a good door would cost, so it be worth it if anything much would work.
PS: I didn't figure I could but a 16 ft grain box and hoist on F350 lol
It's got the 330 in it I think, so engine and everything else is useless to me I know.
I could get the whole truck for about what a good door would cost, so it be worth it if anything much would work.
PS: I didn't figure I could but a 16 ft grain box and hoist on F350 lol
Thread Starter
|
New User
Joined: Nov 2015
Posts: 22
Likes: 0
That what i was thinking. I was hoping the cab was the same. Im not digging this one year only stuff really sence mine is still a working truck. .
Logistics Pro
Joined: Jan 2011
Posts: 4,762
Likes: 54
From: Antelope Valley ,CA
+1 if you don't want it many people on here do
it's $$ in your pocket
it's $$ in your pocket
Trending Topics
Thread Starter
|
New User
Joined: Nov 2015
Posts: 22
Likes: 0
Im going to try to end up with it. Iv got an old 18ft Keweenaw disk he wants so probably do some trading. Iv just got to wait till he desides what he going to do. I think he not give up on fixing it yet
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
gersfeld1
1973 - 1979 F-100 & Larger F-Series Trucks
3
Jul 23, 2010 02:42 PM