New Member
Thread Starter
|
New User
Joined: Apr 2018
Posts: 3
Likes: 0
So I have an F250 Super duty 5.4L. Got a question about the TPS (throttle Position sensor). It's a four pin connector and the one pin connected to the accelerator has 1.3 volts at rest. Everything I read says it should be around .3 - .5 volts at rest. Does this mean my TPS is bad. The TPS does respond when the throttle is increased or decreased. It just starts with 1.3 volts.
Thread
Thread Starter
Forum
Replies
Last Post
