Reverse sensor module
Thread Starter
|
Senior User
Joined: Mar 2012
Posts: 301
Likes: 0
From: Nanuet, NY
Reverse sensor module
Having a difficult time finding a replacement reverse sensor/parking aid module for my 2002 Excursion 4x4 Limited. Discontinued by Ford. No luck so far with junkyards etc. The 4x4 version is different than the 4x2.
It's in the interior rear cargo area behind the rear passenger side jack storage panel behind where the jack sits. It is black with white label.
There is a label on it that says Excursion 4x4 1C7T-15K866-AA.
Anyone have any suggestions or can offer assistance?
It's in the interior rear cargo area behind the rear passenger side jack storage panel behind where the jack sits. It is black with white label.
There is a label on it that says Excursion 4x4 1C7T-15K866-AA.
Anyone have any suggestions or can offer assistance?
Laughing Gas
Joined: Dec 2017
Posts: 1,002
Likes: 641
From: Miami, Fl
Apologies if you have already done so, but have you checked to see if the speaker is bad?
https://www.ford-trucks.com/forums/9...ays-on-11.html
https://www.ford-trucks.com/forums/9...ays-on-11.html
Thread Starter
|
Senior User
Joined: Mar 2012
Posts: 301
Likes: 0
From: Nanuet, NY
Apologies if you have already done so, but have you checked to see if the speaker is bad?
https://www.ford-trucks.com/forums/9...ays-on-11.html
https://www.ford-trucks.com/forums/9...ays-on-11.html
Yes, speaker is fine. The sensors have been changed twice. My issue is it beeps 90 per cent of the time when nothing is behind it. Don't know what else it could be. Wiring and switch are fine.
Veteran/Sheepdog
Joined: Feb 2012
Posts: 6,047
Likes: 110
From: Western AR
Check the angle of your bumper. It must be perfectly level or pointed ever so slightly upward. Same goes for the sensors mounted IN the bumper. Otherwise, the system will pick up ground clutter when the beam hits the ground. I posted testing procedures recently in another thread in here.
Cargo Master
Joined: Dec 2007
Posts: 2,037
Likes: 309
Which yard...aka Gold Mine...is getting it?
Thread
Thread Starter
Forum
Replies
Last Post
