Steering Column Help
Thread Starter
|
Cross-Country
Joined: Jan 2017
Posts: 69
Likes: 0
From: Arizona
Steering Column Help
I am rebuilding the stock steering column on my 1976 f250 automatic non tilt.
The shift lever (spring and plunger) assembly is damaged. I am having a hard time tracking down the parts. I see that there are two springs, the plunger/pin and a washer. Also there was a round piece that is heavily damaged. I'm not even sure what it was or if it cam off of that piece.
I will upload some pictures later today. In the mean time if you have any knowledge or pictures of the internal pieces and possibly the correct order that they go in, I would greatly appreciate it. Also, the correct terminology/wording for those pieces may help me as well. haha
The shift lever (spring and plunger) assembly is damaged. I am having a hard time tracking down the parts. I see that there are two springs, the plunger/pin and a washer. Also there was a round piece that is heavily damaged. I'm not even sure what it was or if it cam off of that piece.
I will upload some pictures later today. In the mean time if you have any knowledge or pictures of the internal pieces and possibly the correct order that they go in, I would greatly appreciate it. Also, the correct terminology/wording for those pieces may help me as well. haha
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
I am rebuilding the stock steering column on my 1976 F250 automatic non tilt.
No tilt wheel until 1978.
The shift lever (spring: 7B071 and plunger: 7361) assembly is damaged. I am having a hard time tracking down the parts.
I see that there are two springs (7B071 & 7293), the plunger (7361) and a washer (354590-S).
Also there was a round piece (7A347
) that is heavily damaged. I'm not even sure what it was or if it came off of that piece.
No tilt wheel until 1978.
The shift lever (spring: 7B071 and plunger: 7361) assembly is damaged. I am having a hard time tracking down the parts.
I see that there are two springs (7B071 & 7293), the plunger (7361) and a washer (354590-S).
Also there was a round piece (7A347
) that is heavily damaged. I'm not even sure what it was or if it came off of that piece. 
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
C0DZ-7B071-A .. Transmission Control Selector Lever Spring / Obsolete
CARPENTER NOS OBSOLETE PARTS in Concord NC has 1 = 800-476-9653.
OBSOLETE RELIABLE PARTS in Nashville GA has 4 = 229-686-5101.
----------------------------------------------------------------------------
FDU-7293-A .. Transmission Gearshift Selector Stop Spring / Obsolete
BOWMAN SALES & SERVICE in Bowman ND has 1 = 701-523-3257.
GREEN SALES CO. in Cincinnati OH has 4 = 800-543-4959.
------------------------------------------------------------------
C0DF-7A347-A .. Transmission Gearshift Selector Lever Plunger Retainer / Obsolete
OBSOLETE RELIABLE PARTS has 1.
CARPENTER NOS OBSOLETE PARTS has 1.
NOS PARTS LTD in Waxahachie TX has 2 = 972-937-2201.
-----------------------------------------------------------------
C0DF-7361-A .. Transmission Gearshift Selector Plunger / Obsolete
CARPENTER NOS OBSOLETE PARTS has 1.
NOS PARTS SOURCE in Olathe KS has 1 = 913-220-5746.
-----------------------------------------------------------------
354590-S78 .. Washer-Use with FDU-7293-A / Obsolete
BOWMAN SALES & SERVICE has 2.
GREEN SALES CO. has 34.
Thread
Thread Starter
Forum
Replies
Last Post
alarmguy38637
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Oct 18, 2016 03:17 PM
66f100project
1961 - 1966 F-100 & Larger F-Series Trucks
9
Jun 9, 2016 06:58 PM
dmynatt
1961 - 1966 F-100 & Larger F-Series Trucks
5
Mar 5, 2009 09:20 PM
