1966 F100 4x4
#1
10-18-2017, 01:49 PM
Join Date: Oct 2017
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#2
10-18-2017, 04:09 PM
F11 = F100 4WD
Y = 352 2V
R = San Jose CA Assembly Plant.
732908 = 1966.
129" Wheelbase.
F = Arcadian Blue.
F110 = F100 4WD; 5,600 lbs. GVWR
281: 2 = Medium Blue Crush Vinyl & Medium Blue Wicker Pattern Vinyl / 81 = 81A Standard Cab.
A = New Process 435 4 Speed Manual Transmission.
A9 = Dana 60.2 or 60.3 Rear Axle / 3.54-1 / Limited Slip / 3,300 lbs. axle capacity.
5,600 lbs. Gross Vehicle Weight Rating.
172 net HP @ 4,000 RPM
72 = San Jose (NorCal) Ford District Sales Office, where the original selling dealer ordered the truck from.
Y = 352 2V
R = San Jose CA Assembly Plant.
732908 = 1966.
129" Wheelbase.
F = Arcadian Blue.
F110 = F100 4WD; 5,600 lbs. GVWR
281: 2 = Medium Blue Crush Vinyl & Medium Blue Wicker Pattern Vinyl / 81 = 81A Standard Cab.
A = New Process 435 4 Speed Manual Transmission.
A9 = Dana 60.2 or 60.3 Rear Axle / 3.54-1 / Limited Slip / 3,300 lbs. axle capacity.
5,600 lbs. Gross Vehicle Weight Rating.
172 net HP @ 4,000 RPM
72 = San Jose (NorCal) Ford District Sales Office, where the original selling dealer ordered the truck from.
#3
10-23-2017, 03:56 PM
Man,
That sounds like a tough truck, even back in '66 !
I would trade my '65 F100 2WD for that truck in a minute! I am interested in the '79 250 chassis with the Dana 60! I would put some lift springs, front and rear, and also another Dana 60 up front!
On my '65 F100 2WD conversion to 4WD!
That sounds like a tough truck, even back in '66 !
I would trade my '65 F100 2WD for that truck in a minute! I am interested in the '79 250 chassis with the Dana 60! I would put some lift springs, front and rear, and also another Dana 60 up front!
On my '65 F100 2WD conversion to 4WD!
Thread
Thread Starter
Forum
Replies
Last Post
diesldoct
1961 - 1966 F-100 & Larger F-Series Trucks
5
04-25-2014 12:05 PM