When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Bought these for my Ex. I didn't know there were different sizes from the front and back seat areas. The front seat grab handle covers are twice as big as these ones. These are slightly less than 1-1/4" long. They are both supposedly tan, but slightly different shades.
Rear hatch lock assy parts. Driver's side cable is screwed up. You may be able to find a replacement for it? Only includes what you see. No lock cylinder or actuator. Center mechanism seems to be in good shape. Should fit in a medium flat rate box.
Rear hatch lock assy parts. Driver's side cable is screwed up. You may be able to find a replacement for it? Only includes what you see. No lock cylinder or actuator. Center mechanism seems to be in good shape. Should fit in a medium flat rate box.
Replaced the end links and bushings on my front sway bar. I have 3 sets of front bushings that didn't fit and is easier to give them away then return them. I went with Ford parts. So here they are:
Moog 80202 1 set of 2
ACDelco 2 sets of 2 (ordered extra one by mistake)
I don't know what they fit but it isn't my 2wd. It said they would but they don't. You would need larger brackets for these to work.
Replaced the end links and bushings on my front sway bar. I have 3 sets of front bushings that didn't fit and is easier to give them away then return them. I went with Ford parts. So here they are:
Moog 80202 1 set of 2
ACDelco 2 sets of 2 (ordered extra one by mistake)
I don't know what they fit but it isn't my 2wd. It said they would but they don't. You would need larger brackets for these to work.
PM me if interested.
Do you mind posting a pic with a tape measure?
I might be interested, depending on whether I can make them work on my 4x4 Ex.
Stewart
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
I just replaced the old Tekonsha Voyager in my EX with a new Tekonsha Prodigy P3. I was going to trash the Voyager but thought someone here might have a use for it. It comes with the Ford specific pigtail. The Voyager works fine for what it is, but I'm pulling a fairly heavy toy hauler and wanted finer control of the braking.
PM me and I'll ship it to you with the brackets and whatever else I have, I'll cover the shipping provided it doesn't run over $5.00
MDH
I just replaced the old Tekonsha Voyager in my EX with a new Tekonsha Prodigy P3. I was going to trash the Voyager but thought someone here might have a use for it. It comes with the Ford specific pigtail. The Voyager works fine for what it is, but I'm pulling a fairly heavy toy hauler and wanted finer control of the braking.
PM me and I'll ship it to you with the brackets and whatever else I have, I'll cover the shipping provided it doesn't run over $5.00
MDH
>>>>Edit. Interested party changed his mind, Still Available Edit<<<<
Multi-Switch and Ignition Assembly
