just started running rough
Thread Starter
|
New User
Joined: Sep 2003
Posts: 9
Likes: 0
just started running rough
My B2 was running fine until just the other day when it started acting up. When I first start it up it will stall the first couple of times. when it does stay running it runs real rough and every once in awhile it will rev up like nothings wrong for about 10 secs the go bak to running rough. here's what I've done so far: new cap & rotor plugs and wires, new O2 sensor, new air filter the oil was changed a day before it acted up also flushed and changed the antifreeze. getting fed up, any help would be great. BTW it's an 88 B2 4x4 with 97500 miles.
Thread Starter
|
New User
Joined: Sep 2003
Posts: 9
Likes: 0
just started running rough
Well after going back to basics and checking again for vaccum leaks, it smoothed out when i pulled the MAP sensor vaccum hose
and 1 new MAP sensor later its purring smooth at idle again. thanks for all the input.
and 1 new MAP sensor later its purring smooth at idle again. thanks for all the input.
