SCT TS+ Users
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 373
Likes: 1
From: Anchorage, Alaska
SCT TS+ Users
Hi All,
I've been playing with my SCT Livewire TS+ and I am trying to get the EGT's to show on the monitor. I am not running the add on pyro sensor, but just want to tap the truck's existing sensors for exhaust temp. Can anyone tell me how to do this?
Thanks!
I've been playing with my SCT Livewire TS+ and I am trying to get the EGT's to show on the monitor. I am not running the add on pyro sensor, but just want to tap the truck's existing sensors for exhaust temp. Can anyone tell me how to do this?
Thanks!
Postmaster
Joined: Nov 2003
Posts: 3,595
Likes: 0
From: Utah County, UT
I wasn't able to find a way to make it work and went with forscan/obdii. After doing such, I also learned that with my current setup, even loaded, egts where not going to be a problem, thus I don't even pull the tablet out when towing to monitor, rather have the drink space. It does seem real weird as with 7.3 you could easily send egts up to inferno if you where not paying attention
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 373
Likes: 1
From: Anchorage, Alaska
I've confirmed this as well by talking to SCT. They don't have a way to do it, which is stupid to me given the truck has the capability for it. Since I am still running stock, I'm not going to worry about it. Seems weird to me to not monitor that with all the weight I'm pulling, but oh well. I'll worry about it later on when I finish the delete.
Thread
Thread Starter
Forum
Replies
Last Post
