Finally a minor victory
#16
Abe ,the pic above of the yellow motor was a pic i found on here , my engine is the red one at the top of the thread .
I thought it was what i needed to complete the carb linkage .
But i think that setup is only required if running an auto trans .
But after looking at yours we have the same arm on the firewall and carbs are similar , so i think the way yours is setup is how mine should be .
I thought it was what i needed to complete the carb linkage .
But i think that setup is only required if running an auto trans .
But after looking at yours we have the same arm on the firewall and carbs are similar , so i think the way yours is setup is how mine should be .
#17
Abe ,the pic above of the yellow motor was a pic i found on here , my engine is the red one at the top of the thread .
I thought it was what i needed to complete the carb linkage .
But i think that setup is only required if running an auto trans .
But after looking at yours we have the same arm on the firewall and carbs are similar , so i think the way yours is setup is how mine should be .
I thought it was what i needed to complete the carb linkage .
But i think that setup is only required if running an auto trans .
But after looking at yours we have the same arm on the firewall and carbs are similar , so i think the way yours is setup is how mine should be .
Thread
Thread Starter
Forum
Replies
Last Post
Saleenguy
General Automotive Discussion
6
12-08-2008 11:24 PM
white Buffalo
1999 - 2003 7.3L Power Stroke Diesel
14
04-21-2008 08:14 PM
airharley
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
09-03-2006 10:13 AM