Howdy!
Thread Starter
|
4wd Low
Joined: May 2017
Posts: 11
Likes: 0
Howdy!
Hello,
Currently doing a frame off restoration on my 1978 Bronco. I have the body stripped down and off the frame. The frame is stripped down and getting ready to be sent out for blasting and powder-coating. I have a 460 block out of a 1972 Thunderbird, and D0VE-C heads that I am building for the engine. My plans are to Line-X the underside, the floor, and the outer body up to the chrome molding mid-line. Thanks for having me, hope to get some advice about some things I am not knowledgeable about. Here's some pictures of my project. Enjoy!
Currently doing a frame off restoration on my 1978 Bronco. I have the body stripped down and off the frame. The frame is stripped down and getting ready to be sent out for blasting and powder-coating. I have a 460 block out of a 1972 Thunderbird, and D0VE-C heads that I am building for the engine. My plans are to Line-X the underside, the floor, and the outer body up to the chrome molding mid-line. Thanks for having me, hope to get some advice about some things I am not knowledgeable about. Here's some pictures of my project. Enjoy!
Thread
Thread Starter
Forum
Replies
Last Post
