So I'm looking at starting the project swap soonish. I'm gathering parts starting now. Well started a while ago but finally going to start making purchases and making things that need made. I have motor, ford manual adapter, all that stuff. And a vehicle to put it in. Along with a 5 speed trans already. What I need to figure out is how I can get the vibrations/ noise down as mush as possible. It's won't kill me if I can't and it will not be silent I know. But just some things to help with the vibrations and noise is what I'm looking for. Along with someone else's swap so I can see what they bought/made and if I can some measurements to be able to make a few things like motor mount brackets, a/c brackets, and even some clearance pictures to decide if I want top or bottom mounted turbo. I'm open ears. Would also like to get some advise to make it easier on myself, what all else is needed to get my factory dash to work? And what else am I going to need. I know of the majority of it just want to make sure I'm not missing anything.