8.8 Axle Build
Thread Starter
|
Senior User
Joined: Jan 2011
Posts: 487
Likes: 2
From: Chicago
8.8 Axle Build
I will be building an 8.8 for my 98 E150.
Axle housing will be a 1995
Differential carrier is Ford
Ring and Pinion is FRPP 3.55
Spider gears are Yukon Gear
Axle housing will be a 1995
Differential carrier is Ford
Ring and Pinion is FRPP 3.55
Spider gears are Yukon Gear
Cross Shaft is Ford
Clutches are FRPP carbon fiber
S-Spring is undecided
Axles are either Ford or aftermarket (undecided)
Bearings will all be Timken where applicable
This application will be to be a for moderate towing, lots of highway and in-town driving, and snow.
Clutches are FRPP carbon fiber
S-Spring is undecided
Axles are either Ford or aftermarket (undecided)
Bearings will all be Timken where applicable
This application will be to be a for moderate towing, lots of highway and in-town driving, and snow.
Thread
Thread Starter
Forum
Replies
Last Post
Welder Guy
1997 - 2003 F150
1
May 29, 2012 08:23 PM
aurgathor
Clutch, Transmission, Differential, Axle & Transfer Case
5
Oct 23, 2004 10:36 AM
ClatonK
Clutch, Transmission, Differential, Axle & Transfer Case
5
Jan 15, 2004 10:57 PM
pgood52636
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Apr 11, 2000 03:33 PM
