PCM and Gauges Quit Working
#1
PCM and Gauges Quit Working
Hi All,
I have a 1999(03/98 Production Date) F350 DRW Dump 5.4L Reg Cab. I just replaced the ECM (Drivers side Kick plate) with a used ECM (ECM#'s compatible with old.
1. Truck now starts and runs but will not shut off at the key.
2. None of the Instarament gauges work. No gas guage, no speedo, no tach, no bat no odometer or trip odometer. Not one single gauge works.
Any help would be forever appreciated.
Thanks
Rob
I have a 1999(03/98 Production Date) F350 DRW Dump 5.4L Reg Cab. I just replaced the ECM (Drivers side Kick plate) with a used ECM (ECM#'s compatible with old.
1. Truck now starts and runs but will not shut off at the key.
2. None of the Instarament gauges work. No gas guage, no speedo, no tach, no bat no odometer or trip odometer. Not one single gauge works.
Any help would be forever appreciated.
Thanks
Rob
Thread
Thread Starter
Forum
Replies
Last Post
daywalker
General NON-Automotive Conversation
21
03-10-2001 03:51 PM