When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I wonder if the clips line up only one way? Maybe that's why some folks say they fit and others say the clips are in the wrong spot. Sounds like something Ford would have done to make sure it gets mounted correctly.
I wonder if the clips line up only one way? Maybe that's why some folks say they fit and others say the clips are in the wrong spot. Sounds like something Ford would have done to make sure it gets mounted correctly.
That wasn't the case for mine. I tried it both way's, clips were off either way I had it.
Yeah, I tried mine both ways and no they wouldn't line up either way. For the record, this one has two clips that still don't line up so i'll have to remove and reinstall them correctly.
I've replaced mine two times since owning my 71 truck an notice when ordering it by yr select.
Never had any problems with the clips lining up lip down. If lip was up it would fill with leaves & crap.
With lip down any debris will fall into engine bay or to the ground.
Well I'm really confuse now. That picture I posted was supposedly from a 71 Ranger with 315 miles on it. It was from the Fordification website. I'll guess I'll flip a coin at this point.
Finally found undisputable evidence of the correct way to mount it.
No confusion here think about it.
The hood folds down on it that why in your picture the lip is folded downwards proves it's upside down. An would drop leaves an bird poop into it to the point it would have to be cleaned out.
Yeah, I tried mine both ways and no they wouldn't line up either way. For the record, this one has two clips that still don't line up so i'll have to remove and reinstall them correctly.
I tried to install a new one, when I pulled it away the clips would fall behind the firewall down into the cowl area with no way I have thought of yet to be able to retrieve. Have you guys had this problem.........???
Maybe that's why some folks say they fit and others say the clips are in the wrong spot. Sounds like something Ford would have done to make sure it gets mounted correctly.
And the seal is too rigid.
