When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've seen a few references to swapping the armrests on the front seats. My attempts at finding a "how-to" have proven to be unfruitful. Could someone please point me in the proper direction so I can see how difficult it is? I'd like to get mine swapped before the stitching starts separating too much on the driver's side.
So I'm moving and switching the cover, not the whole armrest. Thank you for the information, there's a good chance I would have overthought the whole process.
What are you replacing the covers with? My drivers side is getting cracked enough it'll bite me sometimes. I've seen commercial replacements but seem to be very expensive.
What are you replacing the covers with? My drivers side is getting cracked enough it'll bite me sometimes. I've seen commercial replacements but seem to be very expensive.
I'm just switching the driver's side and the passenger's side. This causes them to both flip over and start using the untouched bottom half.
guess what I'm about to go do?
