64' F250 hubcaps
#1
64' F250 hubcaps
Hey guys this is my first post so please let me know if I do something wrong!
I'm just finishing restoring an old 64 f250 for my dad (Birthday present) but need a few parts and can't seem to find them anywhere. I believe the truck originally came with hubcaps and I would love to get some but I just can't find any for sale. It has the Dayna60 in the back so would probably need the deep dish ones. Could anyone provide me with some advice on which ones were stock and if anyone has some for sale?
Cheers!
Thomas
I'm just finishing restoring an old 64 f250 for my dad (Birthday present) but need a few parts and can't seem to find them anywhere. I believe the truck originally came with hubcaps and I would love to get some but I just can't find any for sale. It has the Dayna60 in the back so would probably need the deep dish ones. Could anyone provide me with some advice on which ones were stock and if anyone has some for sale?
Cheers!
Thomas
#2
'64 F250 hubcaps
Hey guys, this is my first post.
I'm just finishing restoring an old 64 F250 for my dad (Birthday present), but need a few parts and can't seem to find them anywhere.
I believe the truck originally came with hubcaps and I would love to get some, but I just can't find any for sale.
It has the Dana 60* .. so would probably need the deep dish ones. Could anyone provide me with some advice on which ones were stock and if anyone has some for sale?
I'm just finishing restoring an old 64 F250 for my dad (Birthday present), but need a few parts and can't seem to find them anywhere.
I believe the truck originally came with hubcaps and I would love to get some, but I just can't find any for sale.
It has the Dana 60* .. so would probably need the deep dish ones. Could anyone provide me with some advice on which ones were stock and if anyone has some for sale?
See the parts catalog pic below to see what the TYPE 1 hubcap looks like.
Be very careful when buying, as E100's & F100's also came with TYPE 1 hubcaps (several different versions including stainless), but they're 9 1/2" diameter.
C1TZ-1130-B .. TYPE 1 "Innie" Hubcap - painted argent - 10 1/2" diameter / Obsolete
1961/65 F250 2WD
CARPENTER NOS OBSOLETE PARTS in Concord NC has 1 = 800-476-9653.
-----------------------------------------------------------------------------------
C6TZ-1130-F .. TYPE 1 "Innie" Hubcap - painted argent with painted red FORD letters - 10 1/2" diameter / Obsolete
1966/67 F250 2WD
KAMA OBSOLETE PARTS in East Bethel MN has 1 = 763-434-0123.
---------------------------------------------------------------------------
C3TZ-1130-C .. TYPE 1 "Innie" Hubcap - painted argent - 10 1/2" diameter / Obsolete
1963/67 F250 4WD - rear wheels only.
No Ford dealer or obsolete parts vendor has any.
-------------------------------------------------------
"Innie" .. so called because the hubcap snaps over tabs located on the inside of the wheels center section.
All 3 of these hubcaps are very hard to find, no one reproduces them. One member of this forum took one and installed a clock in it. Then he found out how rare it was.
*Some 1954/55 F250's, all 1956/72 F250's, some 1973/85 F250's came with the Dana 60 rear axle.
#3
Welcome to FTE
See the parts catalog pic below to see what the TYPE 1 hubcap looks like.
Be very careful when buying, as E100's & F100's also came with TYPE 1 hubcaps (several different versions including stainless), but they're 9 1/2" diameter.
C1TZ-1130-B .. TYPE 1 "Innie" Hubcap - painted argent - 10 1/2" diameter / Obsolete
1961/65 F250 2WD
CARPENTER NOS OBSOLETE PARTS in Concord NC has 1 = 800-476-9653.
-----------------------------------------------------------------------------------
C6TZ-1130-F .. TYPE 1 "Innie" Hubcap - painted argent with painted red FORD letters - 10 1/2" diameter / Obsolete
1966/67 F250 2WD
KAMA OBSOLETE PARTS in East Bethel MN has 1 = 763-434-0123.
---------------------------------------------------------------------------
C3TZ-1130-C .. TYPE 1 "Innie" Hubcap - painted argent - 10 1/2" diameter / Obsolete
1963/67 F250 4WD - rear wheels only.
No Ford dealer or obsolete parts vendor has any.
-------------------------------------------------------
"Innie" .. so called because the hubcap snaps over tabs located on the inside of the wheels center section.
All 3 of these hubcaps are very hard to find, no one reproduces them. One member of this forum took one and installed a clock in it. Then he found out how rare it was.
*Some 1954/55 F250's, all 1956/72 F250's, some 1973/85 F250's came with the Dana 60 rear axle.
See the parts catalog pic below to see what the TYPE 1 hubcap looks like.
Be very careful when buying, as E100's & F100's also came with TYPE 1 hubcaps (several different versions including stainless), but they're 9 1/2" diameter.
C1TZ-1130-B .. TYPE 1 "Innie" Hubcap - painted argent - 10 1/2" diameter / Obsolete
1961/65 F250 2WD
CARPENTER NOS OBSOLETE PARTS in Concord NC has 1 = 800-476-9653.
-----------------------------------------------------------------------------------
C6TZ-1130-F .. TYPE 1 "Innie" Hubcap - painted argent with painted red FORD letters - 10 1/2" diameter / Obsolete
1966/67 F250 2WD
KAMA OBSOLETE PARTS in East Bethel MN has 1 = 763-434-0123.
---------------------------------------------------------------------------
C3TZ-1130-C .. TYPE 1 "Innie" Hubcap - painted argent - 10 1/2" diameter / Obsolete
1963/67 F250 4WD - rear wheels only.
No Ford dealer or obsolete parts vendor has any.
-------------------------------------------------------
"Innie" .. so called because the hubcap snaps over tabs located on the inside of the wheels center section.
All 3 of these hubcaps are very hard to find, no one reproduces them. One member of this forum took one and installed a clock in it. Then he found out how rare it was.
*Some 1954/55 F250's, all 1956/72 F250's, some 1973/85 F250's came with the Dana 60 rear axle.
What would determine which hubcaps came with the truck, is it the trim code? is there some way to know for sure which ones came with it or was there always an option and it was one of them?
Would this be a likely what came factory on a 64 f100? Bottlecap? Painted argent or argent with red letters on Wibledon or (whatever) white 15" rims?
These below were on the truck when I bought it, with larger sized bias tires. Does anyone know what they are from?
I found one similar in a shed out at my farm, kind of beat up... Ill have to more digging in the barns and sheds out there, my dad ran an auto body shop in the 70's and 80's and there are lots of trim and other random things like these still kicking around.
#4
#1) What is the diameter of the painted "innie" hubcap? If it 9 1/2" .. it's for an F100. 10 1/2" .. it's for an F250.
#2) The stainless "innie" hubcap with the blue FORD letters is 6A-1130-A = late 1947 & 1948 Ford Passenger Cars; 1948/52 F1 / Reproduced
#3) The stainless "innie" hubcap below it is 1946, early 1947 Ford Passenger Cars. The FORD letters and the 'slashes' were originally painted red. May/may not be reproduced.
#2) The stainless "innie" hubcap with the blue FORD letters is 6A-1130-A = late 1947 & 1948 Ford Passenger Cars; 1948/52 F1 / Reproduced
#3) The stainless "innie" hubcap below it is 1946, early 1947 Ford Passenger Cars. The FORD letters and the 'slashes' were originally painted red. May/may not be reproduced.
#5
Thread
Thread Starter
Forum
Replies
Last Post
PappaTiempo
1961 - 1966 F-100 & Larger F-Series Trucks
12
08-26-2013 06:30 PM
Triumph
1961 - 1966 F-100 & Larger F-Series Trucks
11
11-11-2012 01:55 PM
Karthurbry
1961 - 1966 F-100 & Larger F-Series Trucks
13
08-02-2010 12:39 PM