when doing the crown vic swap are there any specific measurements on where to it needs to be, front to back i mean, before i removed the old suspension i marked where the center of the wheels was, just want to check if there are any recommendations as far as alignment measurements

 

Check out "Texasknowhow" on youtube. That guy goes through the whole process very nicely.

https://www.youtube.com/user/Texasknowhow

 

thank you that was very helpful

 

X2 on Texas know how. This guy did a great video series on the CV front install and also his 8.8 rear out of an explore. Best I've seen.