the Hardward
Thread Starter
|
Junior User
Joined: Aug 2016
Posts: 74
Likes: 0
From: ruhrpott germany
the Hardward
hello folks, it's me, the HARDWARD from germany.
now I'm 50 jears old and I has buy me a long time wannahave... the 1986
(yes,I like that button) F250 "bullnose" regcap 4x4 460ci/C6.
it's hard to find one here in germany and if U find one, it's rotten to the bone or expensive to the moon.
so, now I get one from California with original paint(tan, I think) no rust, in a very used condition(lota dings and dends).
first it takes me two days to get it run. put on a new carb, pull out the leaky pollution makaroni, adjust timing...
now I strip the entire inerior to get it back to original condition.
my plan is, to add a second color(brown) to get the nice tutone option, 'cos most of the dents are on top of the roof and the hood(no idear how they get there).
my first question is(be sure, there's more) were can I get the missing lower RH XLT moldings for the door and bed?
please tell me how to load op pictures in the thread and you will get Alot.
I hope I did it the right way, excuse my bad english.
stay tuned, the Hardward
now I'm 50 jears old and I has buy me a long time wannahave... the 1986
(yes,I like that button) F250 "bullnose" regcap 4x4 460ci/C6. it's hard to find one here in germany and if U find one, it's rotten to the bone or expensive to the moon.
so, now I get one from California with original paint(tan, I think) no rust, in a very used condition(lota dings and dends).
first it takes me two days to get it run. put on a new carb, pull out the leaky pollution makaroni, adjust timing...
now I strip the entire inerior to get it back to original condition.
my plan is, to add a second color(brown) to get the nice tutone option, 'cos most of the dents are on top of the roof and the hood(no idear how they get there).
my first question is(be sure, there's more) were can I get the missing lower RH XLT moldings for the door and bed?
please tell me how to load op pictures in the thread and you will get Alot.
I hope I did it the right way, excuse my bad english.
stay tuned, the Hardward
Thread
Thread Starter
Forum
Replies
Last Post
