Looking for nuts

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2016 | 08:59 PM

leegrisham

Thread Starter

5th Wheeling

Joined: Sep 2015

Posts: 39

Likes: 11

Looking for nuts

Hey guys,

Let's just say hypothetically you were working on your truck and you dropped a 10mm nut like what is on the front side of the FICM and couldn't find it. Where or what part number could you use to get more?

You know, hypothetically... for a friend.

Jul 25, 2016 | 09:03 PM

LindenBruce

Laughing Gas

Joined: Dec 2005

Posts: 972

Likes: 224

From: Linden, Ca.

I think it's a 6x1MM IIRC. If so you can find them at your local hardware store or big box home supply chain. Theoretically of course. LOL B.

Jul 25, 2016 | 09:06 PM

leegrisham

Thread Starter

5th Wheeling

Joined: Sep 2015

Posts: 39

Likes: 11

https://www.amazon.com/10-1-5mm-Metr...+FLANGE+NUT+GM

I did some GTSing, this looks really like it to me.

Jul 25, 2016 | 10:24 PM

WolfCreek540

Mountain Pass

Joined: Apr 2016

Posts: 130

Likes: 1

From: Nampa, Idaho

If your intakes are exposed don't drop any hardware. Ask me how I know!

Jul 26, 2016 | 12:10 AM

leegrisham

Thread Starter

5th Wheeling

Joined: Sep 2015

Posts: 39

Likes: 11

Quote:

Originally Posted by WolfCreek540

If your intakes are exposed don't drop any hardware. Ask me how I know!

Oh gosh. Now I will be worried about that... I did have the cold/drivers side cac tube off. And the crank case ventilation out... I sure do hope it didn't end up in one of those ....