Any place a good source for f600 parts online? 1974. Also here my VIN if anyone has any engine info they can get from it. F60DVU20602. I think it's a 330 FT but not positive. It has a two speed rear axel and I'm trying to get as much info on it as possible. I'm not entire sure how it works. Thanks.

 

Post this in the heavy duty truck forum...

Get the 73-79 ford master parts cd for medium diuties

become friendly with member number dummy.. bill

You can get many parts at Napa.. and I get mine at Oriellys.. they still have 1975 and newer F500 listed in the system.. many parts cross over to the F600

 

You have 330HD motor, code D. Beefy as hell, and unless you run it dry on oil it's virtually impossible to kill.

 

FYI the brake drums are harder to find than a unicorn so be careful.

 

F60 = F600 2WD (gas) / D = 330 2V Heavy Duty FT engine / V = Kentucky Truck Assembly Plant / U20602 = 1974.

VIN doesn't tell you much once it's decoded.

Post all the codes stamped on the Warranty Plate, riveted to the left door face below the latch.

Please ask further questions in the LARGE TRUCK forum, most members of this forum have F100/350 pickups.