NH 2016 Brining in the New Year in January
#16
I have to pull the bed off... It was a PITA because the bed liner was frozen in, with snow /ice and various parts I left it. It's ready to lift off now.
The cross-member up by the cab rotted off and took a small chunk of the frame with it. I bought section from the Junkyard and am going to weld it in tomorrow, once I get some help lifting the bed off in the AM.
I've been putting it off for a while... but I finally have a few days to it. I may make a thread for it, we'll see how it goes.
The cross-member up by the cab rotted off and took a small chunk of the frame with it. I bought section from the Junkyard and am going to weld it in tomorrow, once I get some help lifting the bed off in the AM.
I've been putting it off for a while... but I finally have a few days to it. I may make a thread for it, we'll see how it goes.
Your doing a better job than me. A bunch of years ago my '72 had the rotted front crossmember, frame was good. I shooved a 2x4 into good part of the cross member drilled a hole and put the bolts back in. Held from '97 in till I sold it in '13.
#18
I'm into this truck for short money, and it's got low miles on it (120k on a 00'). I'm going to mount a minute mount plow I have to it, and use it to tow stuff to the junkyard / dump... so I thought it was worth fixing.
I love how cheap parts are for these trucks. I just did both manifolds, plugs, wires, front brakes, rotors, belt, an upper ball joint and a few tie rods. I think I'm into it for $350 bucks or so in parts, plus what I paid for the truck. It should be pretty reliable for a few yrs after I finish this.
#25
I used to go there with the Ford Focus group but that's all ancient history now
I haven't been to the track in more than a few years now.
#26
The Ranger fired right up like it was 40 degrees out.
#29
Guys almost forgot.
Chapter Map:
Thread:
https://www.ford-trucks.com/forums/9...mbers-map.html
Direct Link:
https://www.google.com/maps/d/edit?m...2C9.656982&z=7
Chapter Map:
Thread:
https://www.ford-trucks.com/forums/9...mbers-map.html
Direct Link:
https://www.google.com/maps/d/edit?m...2C9.656982&z=7
#30
I forgot about that.
I moved to Northwood but my Mom still lives about 10 minutes away
I'm at NHMS once a month during the summer trying not to hit cones
I moved to Northwood but my Mom still lives about 10 minutes away
I'm at NHMS once a month during the summer trying not to hit cones