Finally all but DEAD
#1
Finally all but DEAD
Ol'Rattlure is all but completely stopped. It has been showing CEL every time I have drove it. The last outing was tuff, I thought I was not going to get back home. But it did.
Now that is in the drive way, now when I start it cold it cranks right up, idles right 650-700 rpm. As soon as the glow plug relay cuts off so does the truck. It is absolutely a fast shut down , just as if I cut the switch off.
I can do this all day, WTS, start , GPR drops out and engine shuts off.
I got a cable that plugs into the port under the passenger side dash now I have to find a USB female to a mini USB male connector to my tablet with Torque Pro App
I have a guy that work at the ford place here and is awesome on PSD engines. He promised to bring the old style computer reader from his work, he has both styles plus all the new stuff. He owns all his tools and test equipment.
He also has a very nice shop at his house, but he is as slow as molasses at the south pole in winter. he also has told me 3 times in the last 2 weeks he will stop by here a check it out. He drives by my house twice a day, every day he goes to work, it is just about 1/2 mile out of his way.
Any ways I will try to find an adaptor of my tablet and see if I can get Torque Pro to work
I hope all of ya'll had a Great Christmas and a better year coming.
Joey Fletcher
Durham NC
Now that is in the drive way, now when I start it cold it cranks right up, idles right 650-700 rpm. As soon as the glow plug relay cuts off so does the truck. It is absolutely a fast shut down , just as if I cut the switch off.
I can do this all day, WTS, start , GPR drops out and engine shuts off.
I got a cable that plugs into the port under the passenger side dash now I have to find a USB female to a mini USB male connector to my tablet with Torque Pro App
I have a guy that work at the ford place here and is awesome on PSD engines. He promised to bring the old style computer reader from his work, he has both styles plus all the new stuff. He owns all his tools and test equipment.
He also has a very nice shop at his house, but he is as slow as molasses at the south pole in winter. he also has told me 3 times in the last 2 weeks he will stop by here a check it out. He drives by my house twice a day, every day he goes to work, it is just about 1/2 mile out of his way.
Any ways I will try to find an adaptor of my tablet and see if I can get Torque Pro to work
I hope all of ya'll had a Great Christmas and a better year coming.
Joey Fletcher
Durham NC
#4
Dang Guy
Wow you are close......What type of work are you doing in Ral. and what time do you get off.
I am off of the 182 exit of I-85 North. My place is about 1/2 miles from the exit, can see both lanes of the interstate from my little place.
Do you still have my phone number?
Can't wait to see ya...
Wow you are close......What type of work are you doing in Ral. and what time do you get off.
I am off of the 182 exit of I-85 North. My place is about 1/2 miles from the exit, can see both lanes of the interstate from my little place.
Do you still have my phone number?
Can't wait to see ya...
#6
Join Date: Jan 2012
Location: Southern West Virginia
Posts: 11,132
Likes: 0
Received 1 Like
on
1 Post
Dang Guy
Wow you are close......What type of work are you doing in Ral. and what time do you get off.
I am off of the 182 exit of I-85 North. My place is about 1/2 miles from the exit, can see both lanes of the interstate from my little place.
Do you still have my phone number?
Can't wait to see ya...
Wow you are close......What type of work are you doing in Ral. and what time do you get off.
I am off of the 182 exit of I-85 North. My place is about 1/2 miles from the exit, can see both lanes of the interstate from my little place.
Do you still have my phone number?
Can't wait to see ya...
#7
Well Fellows Ol'Rattlure is up and stroking again!!!
Bill came over and hooked his computer to my old truck and saw that the ICP was acting up and not reading correctly.
Got the ICP from Riffraff and installed it today, cranked right up and idled for better part of an hour. Oh man was that nice to hear. Took it down the road and ran like a champ.
Many thanks to ReBill for helping this ol'man out, also all the other guys that gave advise.
Ya'll are awesome
Thanks
Bill came over and hooked his computer to my old truck and saw that the ICP was acting up and not reading correctly.
Got the ICP from Riffraff and installed it today, cranked right up and idled for better part of an hour. Oh man was that nice to hear. Took it down the road and ran like a champ.
Many thanks to ReBill for helping this ol'man out, also all the other guys that gave advise.
Ya'll are awesome
Thanks
Trending Topics
#8
#9
#12
Thread
Thread Starter
Forum
Replies
Last Post
alienbogey
1999 - 2003 7.3L Power Stroke Diesel
14
09-28-2013 06:12 AM
Mustangfreak
1999 - 2003 7.3L Power Stroke Diesel
24
10-16-2004 07:05 PM