Custom Tailgate Emblem
New User
Joined: Jan 2017
Posts: 14
Likes: 0
I'd love to have one done to check it out and then the other after that. Can you please tell me how I can connect this gentleman?
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 161
Likes: 0
It still looks good
I only got one for the rear tailgate about two years ago as I have a custom grill and a Ranch Hand grill guard.
It cost me $50, with shipping extra.
You may contact the maker at Michael.Steele@sypris.com.
It cost me $50, with shipping extra.
You may contact the maker at Michael.Steele@sypris.com.
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 161
Likes: 0
Paint information
I provided the paint information for the truck to make sure it was an exact match.
The lettering is raised,as well as the contrasting trim line, and not flat like I've seen with other emblems.
The lettering is raised,as well as the contrasting trim line, and not flat like I've seen with other emblems.
New User
Joined: Jan 2017
Posts: 14
Likes: 0
I only got one for the rear tailgate about two years ago as I have a custom grill and a Ranch Hand grill guard.
It cost me $50, with shipping extra.
You may contact the maker at Michael.Steele@sypris.com.
It cost me $50, with shipping extra.
You may contact the maker at Michael.Steele@sypris.com.
Michael.Steele@sypris.com
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.
New User
Joined: Jan 2017
Posts: 14
Likes: 0
I tried emailing him but the email address appears to not be good.
Michael.Steele@sypris.com
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.
Michael.Steele@sypris.com
The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk.
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 161
Likes: 0
Information
I contacted the phone number I have for him. It went straight to voice mail.
I left a message letting him know that there is interest on this website regarding his custom painted emblems. I asked him to make himself known if he is interested in making any more.
We'll see if he is still monitoring this website.
He made himself known to me a few years ago. I'll see if I can find the original post and see if I can find him again on this or other forums.
I left a message letting him know that there is interest on this website regarding his custom painted emblems. I asked him to make himself known if he is interested in making any more.
We'll see if he is still monitoring this website.
He made himself known to me a few years ago. I'll see if I can find the original post and see if I can find him again on this or other forums.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
New User
Joined: Jan 2017
Posts: 14
Likes: 0
I contacted the phone number I have for him. It went straight to voice mail.
I left a message letting him know that there is interest on this website regarding his custom painted emblems. I asked him to make himself known if he is interested in making any more.
We'll see if he is still monitoring this website.
He made himself known to me a few years ago. I'll see if I can find the original post and see if I can find him again on this or other forums.
I left a message letting him know that there is interest on this website regarding his custom painted emblems. I asked him to make himself known if he is interested in making any more.
We'll see if he is still monitoring this website.
He made himself known to me a few years ago. I'll see if I can find the original post and see if I can find him again on this or other forums.
New User
Joined: Jan 2017
Posts: 14
Likes: 0
I contacted the phone number I have for him. It went straight to voice mail.
I left a message letting him know that there is interest on this website regarding his custom painted emblems. I asked him to make himself known if he is interested in making any more.
We'll see if he is still monitoring this website.
He made himself known to me a few years ago. I'll see if I can find the original post and see if I can find him again on this or other forums.
I left a message letting him know that there is interest on this website regarding his custom painted emblems. I asked him to make himself known if he is interested in making any more.
We'll see if he is still monitoring this website.
He made himself known to me a few years ago. I'll see if I can find the original post and see if I can find him again on this or other forums.
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 161
Likes: 0
He was not in AZ, nor was I
It is very easy to remove the emblem from the tailgate if done carefully. It helps a great deal if the emblem adhesive is warmed up with a hair dryer to make it a bit more supple.
Some people have used fishing line to loop behind the emblem and then drag across the back of the emblem to separate the emblem/adhesive/tailgate.
There are a couple of forums that have conversations on the subject. That is where he contacted me while I was asking similar questions. I just can't remember which site I was on at the time.
I don't frequent this site. I only responded when notified that someone had posted to this thread.
As you can tell from my gallery. I've pretty much outfitted my truck and I haven't had much of a need to monitor this forum.
I'll see if I can find the thread on another forum. You may find it before I do, as I can't remember my password on the other forums that deal with Powerstroke or Dieselstop .com activity.
Some people have used fishing line to loop behind the emblem and then drag across the back of the emblem to separate the emblem/adhesive/tailgate.
There are a couple of forums that have conversations on the subject. That is where he contacted me while I was asking similar questions. I just can't remember which site I was on at the time.
I don't frequent this site. I only responded when notified that someone had posted to this thread.
As you can tell from my gallery. I've pretty much outfitted my truck and I haven't had much of a need to monitor this forum.
I'll see if I can find the thread on another forum. You may find it before I do, as I can't remember my password on the other forums that deal with Powerstroke or Dieselstop .com activity.
New User
Joined: Jan 2017
Posts: 14
Likes: 0
It is very easy to remove the emblem from the tailgate if done carefully. It helps a great deal if the emblem adhesive is warmed up with a hair dryer to make it a bit more supple.
Some people have used fishing line to loop behind the emblem and then drag across the back of the emblem to separate the emblem/adhesive/tailgate.
There are a couple of forums that have conversations on the subject. That is where he contacted me while I was asking similar questions. I just can't remember which site I was on at the time.
I don't frequent this site. I only responded when notified that someone had posted to this thread.
As you can tell from my gallery. I've pretty much outfitted my truck and I haven't had much of a need to monitor this forum.
I'll see if I can find the thread on another forum. You may find it before I do, as I can't remember my password on the other forums that deal with Powerstroke or Dieselstop .com activity.
Some people have used fishing line to loop behind the emblem and then drag across the back of the emblem to separate the emblem/adhesive/tailgate.
There are a couple of forums that have conversations on the subject. That is where he contacted me while I was asking similar questions. I just can't remember which site I was on at the time.
I don't frequent this site. I only responded when notified that someone had posted to this thread.
As you can tell from my gallery. I've pretty much outfitted my truck and I haven't had much of a need to monitor this forum.
I'll see if I can find the thread on another forum. You may find it before I do, as I can't remember my password on the other forums that deal with Powerstroke or Dieselstop .com activity.
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 161
Likes: 0
Surprise!!!!
Mike Steele returned the message I left with him. I was shocked.
He said that he is still willing to help us out with a custom tailgate emblem.
If anyone is still interested, they may reach him at Skeetersteele20@gmail.com
Good timing for me, as mine is beginning to show signs that it needs to be replaced. I've had mine for almost two years and some of the emblem is beginning to flake off of the base.
He said that he is still willing to help us out with a custom tailgate emblem.
If anyone is still interested, they may reach him at Skeetersteele20@gmail.com
Good timing for me, as mine is beginning to show signs that it needs to be replaced. I've had mine for almost two years and some of the emblem is beginning to flake off of the base.
