Taking it off
Taking it off
Senior User
Joined: Jul 2002
Posts: 240
Likes: 0
From: stafford VA
Taking it off
youll also need a t-50 torx bit for the seatbelts, and a t-40 tamper proof torx bit for the actual screw holding the cap down. you might also need a hand or two taking it off. this + a screwdriver was all i needed.
Tim
Tim
Posting Guru
Joined: Jan 2003
Posts: 1,388
Likes: 0
From: SE Texas
Taking it off
Right, the later-model Broncos have the tamper=proof Torx bolts. The 80's Broncos just have 13 10mm bolts. The top weighs in at 120 pounds. so it's a 2 or 3 person job to remove it.
Lead Driver
Joined: Sep 2002
Posts: 9,182
Likes: 12
From: Gateway to the West
Taking it off
The top can be reomoved by one person...its a kind of "turtle-walk" off the tailgate maneuver, but it can be done. Make sure you have something sturdy to step down on to from the tailgate. (Can't take credit for this info., Steve83 imparted this wisdom to me a few months back).
