Mods, please delete
Hotshot
Joined: Dec 2003
Posts: 15,368
Likes: 121
From: Stuttgart, Ar
That's why I suggested you call and talk to Nate or have him put you in touch with Charlie.
Lead Driver
Joined: May 2014
Posts: 6,545
Likes: 13
From: Virginia Beach VA
yep, me too.. like is it a direct swap, what size injectors as in stock works until you get here.. guess I'll be calling, unless someone knows the answers already?
Lead Driver
Joined: Sep 2012
Posts: 7,825
Likes: 96
From: Manteca,Ca
Not sure if you're referring to me, but if so then excuse me for trying to be helpful.
As to why I don't come out and post the link to the turbo it's because the supplier is not a supporting vendor and IIRC that's strictly against forum rules. I'd appreciate anyone who wants to share via PM's but I won't post it publicly.
As to why I don't come out and post the link to the turbo it's because the supplier is not a supporting vendor and IIRC that's strictly against forum rules. I'd appreciate anyone who wants to share via PM's but I won't post it publicly.
P.M Please 
, sorry OP I like new Toys
FTE Leadership Emeritus
Joined: Sep 2003
Posts: 12,242
Likes: 758
From: Houston, Texas
No one is going to give you propietary specs on a product they sell. It's a trade secret and trade secrets are what keep you in business.
If you were looking for the difference between a Powermax and Stock, you could have Googled it:
Garrett GT3782V- 2003-2005 Ford 6.0L PSD
Compressor wheel Inducer: 58.00m
Compressor wheel Exducer: 81.55mm
Compressor housing A/R .58
Turbine wheel inducer diameter: 72.25mm
Turbine wheel exducer diameter: 66.45mm
Turbine housing A/R .9 A/R
Garret powermax GT3788VA:
•Compressor Wheel Inducer: 63.5mm
•Compressor Wheel Exducer: 88mm
•Compressor Wheel Trim: 52
•Turbine Wheel Inducer: 72.5mm
•Turbine Wheel Exducer: 66.5mm
•Turbine Wheel Trim: 84
•Turbine Housing: .90 A/
Other than that, no one shares specs on a turbo they build.
If you were looking for the difference between a Powermax and Stock, you could have Googled it:
Garrett GT3782V- 2003-2005 Ford 6.0L PSD
Compressor wheel Inducer: 58.00m
Compressor wheel Exducer: 81.55mm
Compressor housing A/R .58
Turbine wheel inducer diameter: 72.25mm
Turbine wheel exducer diameter: 66.45mm
Turbine housing A/R .9 A/R
Garret powermax GT3788VA:
•Compressor Wheel Inducer: 63.5mm
•Compressor Wheel Exducer: 88mm
•Compressor Wheel Trim: 52
•Turbine Wheel Inducer: 72.5mm
•Turbine Wheel Exducer: 66.5mm
•Turbine Wheel Trim: 84
•Turbine Housing: .90 A/
Other than that, no one shares specs on a turbo they build.
Thread
Thread Starter
Forum
Replies
Last Post
