bad motor
Thread Starter
|
Posting Guru
Joined: Apr 2003
Posts: 1,456
Likes: 0
From: Indiana
bad motor
Pulled my 351w ho out of the bronco to do a rebuild and found bad news. It's not a 351w ho from the numbers I checked it's out of a 79. d9ae block that has been welded on and d80e heads.
Pulled it because had water in the oil but as it turns out the head gaskets looked good so probaly has a crack somewhere.
Not sure if I will rebuild it or not. Why would some dope put a pllain engine in when it's supposed to be a ho?
Pulled it because had water in the oil but as it turns out the head gaskets looked good so probaly has a crack somewhere.
Not sure if I will rebuild it or not. Why would some dope put a pllain engine in when it's supposed to be a ho?
