reverse sensor disable switch
Thread Starter
|
i ain't rite
Joined: Mar 2005
Posts: 65,426
Likes: 5,508
From: Marlboro Mental Hospital.
reverse sensor disable switch
has anyone figured out a way to disable the reverse sensors by maybe adding a switch to turn off power so it does not constantly go off while plowing and the sensors are snow covered?
i thought maybe by just unplugging the switch would do it, but that did not work.
truck is an 02 diesel with auto trans.
i thought maybe by just unplugging the switch would do it, but that did not work.
truck is an 02 diesel with auto trans.
Thread Starter
|
i ain't rite
Joined: Mar 2005
Posts: 65,426
Likes: 5,508
From: Marlboro Mental Hospital.
yea, i do. after you put the truck in reverse hit the button. but once you take it out of reverse it cancels the shut off function, and you have to hit the button every time you put it in reverse.
Mountain Pass
Joined: May 2007
Posts: 153
Likes: 2
From: Pheasant Hill, CA
I read this for a 02 Excursion. find the speaker for the back up alarm and remove the panel. cut the green wire and install an on and off switch. the alarm will still be working, you just cant hear it.
Thread Starter
|
i ain't rite
Joined: Mar 2005
Posts: 65,426
Likes: 5,508
From: Marlboro Mental Hospital.
perfect!!!! never thought of doing it that way, thanks.
Thread
Thread Starter
Forum
Replies
Last Post
