rebuild issues

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2015 | 10:11 PM

89f250460

Thread Starter

New User

Joined: Sep 2012

Posts: 4

Likes: 0

rebuild issues

i have a 89 f250 a 460 and i blew up the original motor. Anyways got the new motor in and have been driving it but i dont know if i have the little hose off of the air box in the right spot

Feb 16, 2015 | 10:18 PM

Jaime74656

Logistics Pro

Joined: Apr 2011

Posts: 4,744

Likes: 5

From: Earth

pics?????? we can't help diagnose "hoses in the incorrect spot" issues with out any type of pics to see the problem lines in question...

Feb 16, 2015 | 10:50 PM

89f250460

Thread Starter

New User

Joined: Sep 2012

Posts: 4

Likes: 0

Feb 17, 2015 | 08:32 PM

89f250460

Thread Starter

New User

Joined: Sep 2012

Posts: 4

Likes: 0

the reason for asking is i noticed liquid in it and it was gas

Feb 18, 2015 | 08:46 AM

rla2005

Fleet Owner

Joined: Oct 2005

Posts: 20,783

Likes: 1,750

From: Kentucky

On my 5.8L F350 the PCV vent hose went to a filter located in the bottom of the air box. Assuming this is the same hose, yes it goes to the driver side valve cover.

Not unusual to find moisture/oil in the hose. Gas....another story.

Feb 18, 2015 | 02:43 PM

89f250460

Thread Starter

New User

Joined: Sep 2012

Posts: 4

Likes: 0

that is what i thought and also my truck will start fine when its cold but after you get it to running temp it starts hard if it starts at all. I have checked timing and cant figure why