Electronic flasher or resistor for LEDs
Thread Starter
|
Laughing Gas
Joined: Aug 2004
Posts: 808
Likes: 0
From: P.G. VA
Electronic flasher or resistor for LEDs
So I installed two LED front turn signal bulbs and was going to add resistors until I just learned I could add an electronic flasher and get the same result. (sorry I'm not an electronics guy) Now I already have a heavy duty flasher installed to make my lights flash correctly when towing my trailer. If I change that to a electronic flasher will my trailer lights still flash correctly or should I just leave the flasher alone and add resistors behind the front bulbs?
New User
Joined: Feb 2015
Posts: 2
Likes: 0
NAPA
Go to Napa and get a flasher relay from there. I changed all my lamps to LED and was getting the hyper flash. I read on one of the F-150 forums about the LED flasher and it solved the problem.
What's kinda ironic about it is that the LED flasher is basically a dumbed down version of the flasher since it doesn't have the ability to sense the lack of resistance.
Good luck.
What's kinda ironic about it is that the LED flasher is basically a dumbed down version of the flasher since it doesn't have the ability to sense the lack of resistance.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
