When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On the step bars, 3 brackets are used to attach the bar to the truck. 10 bolts in total. On the running board, there are 5 mounting brackets which would yield 18 bolts. On the running boards, are all the brackets attached or did they only attach 3 of the 5 brackets similar to the step bars? Reason I ask is I haven't enough hardware to attach all 5 and am curious if attaching only 3 would be safe like with the step bars.
I'm happy enough to order the hardware but if your folks' board's brackets aren't all attached I wasn't going to go the extra mile either.
I am not entirely sure why they wouldn't use all 5 mounting locations, but here is how the stock running boards are bolted in. I couldn't get all 5 mounts in the picture, only 4, but all 5 have bolts in them. Hope this helps.
I am not entirely sure why they wouldn't use all 5 mounting locations, but here is how the stock running boards are bolted in. I couldn't get all 5 mounts in the picture, only 4, but all 5 have bolts in them. Hope this helps.
Thanks for that bud.
Okay I see what they did. On each of the 5 brackets, they have 2 bolts anchoring it to the truck. On the step bars, there are only 3 brackets and they have 4 bolts anchoring each bracket instead of 2. I think I will mirror yours and use 2 bolts each instead of 4 bolts on each of the 5 brackets. 4 bolts over 5 brackets might be overkill. I'm swapping mine to stainless as well and they aren't all that cheap.
Thanks again for crawling under there. (nice and clean too!)
Lol that's the vent hose for the oil catchcan which is connected to the crankcase vent. I know the hoses look ghetto, it's what I had on hand. I intend to replace that clear junk so don't judge me lol!
I had to hacksaw 6 of the old bolts off. They were pretty rusted. So I replaced them all with stainless steel. I ended up using 4 bolts per bracket instead of 2. That way my OCD would let me sleep instead of knowing I had two wholes not being used per bracket. Thanks again.
I had to hacksaw 6 of the old bolts off. They were pretty rusted. So I replaced them all with stainless steel. I ended up using 4 bolts per bracket instead of 2. That way my OCD would let me sleep instead of knowing I had two wholes not being used per bracket. Thanks again.
Glad you got it worked out! I think I would've had to put all 4 bolts in too, it would be just under there all time...bugging me.
Originally Posted by EXv10
You should do something about all that rust under there.
Yea you gotta love a Texas truck. But alas, Texas can't full credit here. This truck belonged to a couple in OR that also had a house in Cabo. It spent a bunch of time south of the border so there's a ton of sand lurking in it's nooks and crannies. It's only been in TX a couple of years.
Juan, do you think I could pry another favor out of you? My running boards have 2 feet of loom wiring coming off of them and end at a connector. I guess I just assumed where they needed to plug into would be in the vicinity of the running board. I can't find a harness or anything where the running boards should plug into for the lights to work. Are you able to take a picture of where you boards connect to the trucks harness? I'm guess they connect to a connector that runs over to the main harness on the frame.
Juan, do you think I could pry another favor out of you? My running boards have 2 feet of loom wiring coming off of them and end at a connector. I guess I just assumed where they needed to plug into would be in the vicinity of the running board. I can't find a harness or anything where the running boards should plug into for the lights to work. Are you able to take a picture of where you boards connect to the trucks harness? I'm guess they connect to a connector that runs over to the main harness on the frame.
Yea no worries, the only thing is it's raining and it's dark lol so pictures may not be all that great. But it's supposed to be sunny and dry tomorrow, will that work for you?
Yea no worries, the only thing is it's raining and it's dark lol so pictures may not be all that great. But it's supposed to be sunny and dry tomorrow, will that work for you?
I just went looking in my older photos, and yep. I have two that show the connectors. Here they are. The First one, you can see the loom coming from the step to the frame rail, the other shows the connector, also by the frame, but tucked up past all the rear A/C lines.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
