7.3 miss
Thread Starter
|
New User
Joined: Oct 2013
Posts: 5
Likes: 0
7.3 miss
Hi I'm new here, I'm looking for advice to diagnose a dead miss on 1 cylinder,, I suspect bad injector, but don't have a code reader, what are my options? Thx 99' f450, 7.3. Alan s cabazon ca.
It's a Van Gogh
Joined: Feb 2010
Posts: 7,813
Likes: 1,335
From: Elk Grove, CA
Welcome to FTE!
Could be the wiring under the valve cover has come loose. Testing the resistance on those wires is informative and not much work. Click on the link below for a classic thread on the subject.
https://www.ford-trucks.com/forums/8...ck-shakes.html
Could also be a mechanical issue with the injector, or a bad solenoid on it. Swap solenoid with another, say #5, see if problem follows.
Could be the wiring under the valve cover has come loose. Testing the resistance on those wires is informative and not much work. Click on the link below for a classic thread on the subject.
https://www.ford-trucks.com/forums/8...ck-shakes.html
Could also be a mechanical issue with the injector, or a bad solenoid on it. Swap solenoid with another, say #5, see if problem follows.
Thread
Thread Starter
Forum
Replies
Last Post
JohnP3
1999 - 2003 7.3L Power Stroke Diesel
3
Aug 23, 2011 11:14 PM
RobsRedFord
1999 - 2003 7.3L Power Stroke Diesel
4
Oct 19, 2005 09:46 PM
