Exhaust flanges/adapters?
Thread Starter
|
Junior User
Joined: Jun 2003
Posts: 76
Likes: 0
From: Bottom Feeder
Exhaust flanges/adapters?
Now that my A/C is running, I've only got one more major "comfort" factor for the wiff, and that's the noise/exhaust. I climbed under the truck this morning to take a closer look at things, as I was pretty certain I had exhaust leaks somewhere.
The exhaust on my truck has been modified by previous owners. It is dual exhaust with no crossover or Y-pipe, from the manifolds right out through the stacks. And speaking of stacks...the piping comes from the manifolds, through the mufflers, and then through a 2'ft piece of 2.25" exhaust pipe which is shoved INTO the open end of some 3" flex that's clamped onto the bottom of my stacks.
Nice, huh? On top of that, the pipes are rusted on the TOP for about 3" before going into the 3" flex hose.
Anyone know where I can get 2.25 -> 3" adapters? Any other solution come to mind?
Lobstah
The exhaust on my truck has been modified by previous owners. It is dual exhaust with no crossover or Y-pipe, from the manifolds right out through the stacks. And speaking of stacks...the piping comes from the manifolds, through the mufflers, and then through a 2'ft piece of 2.25" exhaust pipe which is shoved INTO the open end of some 3" flex that's clamped onto the bottom of my stacks.
Nice, huh? On top of that, the pipes are rusted on the TOP for about 3" before going into the 3" flex hose.
Anyone know where I can get 2.25 -> 3" adapters? Any other solution come to mind?
Lobstah
Laughing Gas
Joined: Jan 2002
Posts: 759
Likes: 95
