October 2014 BS Thread
Hotshot
Joined: Dec 2006
Posts: 14,069
Likes: 17
From: Melbourne, Ky
I hope everybody faired the storms last night OK. We didn't get anything here at home. I was in Louisville last night and saw the storm from the southwest as it went through Charlestown and then hit the Henry Co. and Oldham Co. area. The sky was clear where I was so you could see to the northeast the huge wall cloud. And the way it was moving, I didn't want to be in front of it! Saw some photos of the Road Ranger in Maysville, KY that got tore up. Haven't heard if that was a confirmed tornado. So far they confirmed that one hit Paris (Bourbon Co.), one hit Stamping Ground (Scott Co), and one hit Sharpsburg (Bath Co.) Also, one hit Clinton Co. 2 nights ago.
Phantom of the Phorum
Joined: Jan 2011
Posts: 5,470
Likes: 1,696
From: Kentucky
We didn't get that weather here, but it was close.
Our address is "Jeffersonville" which got very large hail. We didn't. We just got a couple of waves of hard rain with a little wind.
We watched the storm pass to the north of Lexington from the top of the 5/3 Bank building in downtown. We were doing ropes training for the "Brave the Blue" event that concluded this evening. The storm was really impressive from up there.
Here is a picture looking north from the top. This was before the storm really got to rocking. Sorry about the quality. They don't allow anything loose (cameras, cell phones, etc.) near the rappelling platforms, so this is a capture from my helmet cam.
Our address is "Jeffersonville" which got very large hail. We didn't. We just got a couple of waves of hard rain with a little wind.
We watched the storm pass to the north of Lexington from the top of the 5/3 Bank building in downtown. We were doing ropes training for the "Brave the Blue" event that concluded this evening. The storm was really impressive from up there.
Here is a picture looking north from the top. This was before the storm really got to rocking. Sorry about the quality. They don't allow anything loose (cameras, cell phones, etc.) near the rappelling platforms, so this is a capture from my helmet cam.
Hotshot
Joined: Dec 2006
Posts: 14,069
Likes: 17
From: Melbourne, Ky
I saw the video of the tornado that went through Paris, which I'm sure is in that storm you filmed. That video was on The Weather Channel website.
On a side note, I need to kick myself in the azz! I found the vibration in my 06 yesterday! It was the centramatics on the front axle. For those that don't know, centramatics are suppose to be an onboard balancing system mounted on the wheel hub behind the wheels. Removed them and the vibration is 90% gone! Found out that the drivers side tie rod end is a little loose also. And, the track arm is bent. That is the arm that centers the front axle under the truck. A necessary item when your truck has coil springs. Get those fixed and aligned again and I believe it will be fixed!
On a side note, I need to kick myself in the azz! I found the vibration in my 06 yesterday! It was the centramatics on the front axle. For those that don't know, centramatics are suppose to be an onboard balancing system mounted on the wheel hub behind the wheels. Removed them and the vibration is 90% gone! Found out that the drivers side tie rod end is a little loose also. And, the track arm is bent. That is the arm that centers the front axle under the truck. A necessary item when your truck has coil springs. Get those fixed and aligned again and I believe it will be fixed!
Hotshot
Joined: Dec 2006
Posts: 14,069
Likes: 17
From: Melbourne, Ky
This weekend it will be done. I already have a welder mounted in it as well as the oxygen/propolyne torch tanks. I have a big tool box in the front of the bed for storage for trailer spindles too.
Trending Topics
Thread Starter
|
FTE Chapter Leader
Joined: May 2009
Posts: 8,843
Likes: 27
From: Eastern Ky
I saw the video of the tornado that went through Paris, which I'm sure is in that storm you filmed. That video was on The Weather Channel website.
On a side note, I need to kick myself in the azz! I found the vibration in my 06 yesterday! It was the centramatics on the front axle. For those that don't know, centramatics are suppose to be an onboard balancing system mounted on the wheel hub behind the wheels. Removed them and the vibration is 90% gone! Found out that the drivers side tie rod end is a little loose also. And, the track arm is bent. That is the arm that centers the front axle under the truck. A necessary item when your truck has coil springs. Get those fixed and aligned again and I believe it will be fixed!
On a side note, I need to kick myself in the azz! I found the vibration in my 06 yesterday! It was the centramatics on the front axle. For those that don't know, centramatics are suppose to be an onboard balancing system mounted on the wheel hub behind the wheels. Removed them and the vibration is 90% gone! Found out that the drivers side tie rod end is a little loose also. And, the track arm is bent. That is the arm that centers the front axle under the truck. A necessary item when your truck has coil springs. Get those fixed and aligned again and I believe it will be fixed!
Sorry I haven't been online much lately guys. This last week has almost taken me out!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Phantom of the Phorum
Joined: Jan 2011
Posts: 5,470
Likes: 1,696
From: Kentucky
I hope you have a dryer day than today. I didn't get much done. I REALLY need to cut/split some firewood.
It's a shame what that damn bug has done!
Phantom of the Phorum
Joined: Jan 2011
Posts: 5,470
Likes: 1,696
From: Kentucky
The Southern Pine Beetle hit us hard about 15 years ago. We lost over half our Virginia and Short Leaf pines. We were lucky we didn't loose them all. We have a couple of Hemlocks we watch for the Woolly Adelgid. No sign of them yet.
Thread Starter
|
FTE Chapter Leader
Joined: May 2009
Posts: 8,843
Likes: 27
From: Eastern Ky
Well, the property thing didn't pan out. At least it was before the down payment!
Thank goodness tonight is my last shift for the week...I'm pretty fried atm.
If all goes well, I MIGHT be getting to start replacing my rear wheel arches. Last week was me replacing the D/S engine mount that let go in less than 20,000 miles. The awesome guys at car-quest warrantied it out for me.
Mpg is still 19-21, depending. I am definitely noticing a tad lower mpg, now that the weather is changing.
Thank goodness tonight is my last shift for the week...I'm pretty fried atm.
If all goes well, I MIGHT be getting to start replacing my rear wheel arches. Last week was me replacing the D/S engine mount that let go in less than 20,000 miles. The awesome guys at car-quest warrantied it out for me.
Mpg is still 19-21, depending. I am definitely noticing a tad lower mpg, now that the weather is changing.
Phantom of the Phorum
Joined: Jan 2011
Posts: 5,470
Likes: 1,696
From: Kentucky
It seems to me like the cooler air would be a good thing. But then the refineries may have already switched to their winter mix. (more alcohol based additives)