Looking for tailgate!
Senior User
Joined: Apr 2007
Posts: 281
Likes: 0
From: Bloomfield, Iowa
There are re-pop put there but they have their drawbacks. Unless you live in the desert, anything you find will probably look like this:
Good uni gates are hard to find. The latches you can buy new. Find a junk uni to get the 2 bars that hold the gate in the down position.
Good luck,
SPark
Good uni gates are hard to find. The latches you can buy new. Find a junk uni to get the 2 bars that hold the gate in the down position.
Good luck,
SPark
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
F10 = F100 2WD
J = 223 1V I-6.
R = San Jose CA Assembly Plant.
170059 = 1961, assembled May 1961.
C1TZ-6640700-C .. Uni Tailgate-66 9/32" long = 1961/63 F100/250 / Available reproduced from Dennis Carpenter: $400.00. Does not come with any mounting hardware...which is Uni ONLY.
J = 223 1V I-6.
R = San Jose CA Assembly Plant.
170059 = 1961, assembled May 1961.
C1TZ-6640700-C .. Uni Tailgate-66 9/32" long = 1961/63 F100/250 / Available reproduced from Dennis Carpenter: $400.00. Does not come with any mounting hardware...which is Uni ONLY.
Mountain Pass
Joined: Mar 2010
Posts: 176
Likes: 21
From: GR, MI
tail gate
If you are still looking for a tail gate, I have one I will sell. I has a small amount of rust that needs repair but it looks nothing like the picture in the thread. Send me a pm if you are interesed
Thread
Thread Starter
Forum
Replies
Last Post
uncle champ
1967 - 1972 F-100 & Larger F-Series Trucks
12
Apr 11, 2019 06:13 PM
Sodapop1967
1967 - 1972 F-100 & Larger F-Series Trucks
11
Feb 7, 2019 06:40 PM
xcraftmaticx
1961 - 1966 F-100 & Larger F-Series Trucks
4
Apr 13, 2014 09:37 PM
82fordowner
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Apr 20, 2013 02:06 PM
