Forward Mounted Sway Bar
Thread Starter
|
Senior User
Joined: Jun 2004
Posts: 232
Likes: 0
Forward Mounted Sway Bar
I am looking for a forward mounted sway bar for my '55 F-100. I have looked at the rear mounted ones on a Mustang II frontend, but with the rear sump pan on the 429, I do not think there is room between the crossmember and the pan sump when the pillow blocks are installed. So if someone has used a forward mounted bar please advise.
Fleet Mechanic
Joined: Oct 2011
Posts: 1,891
Likes: 103
From: Birdsboro PA
This chassis engineering sway bar looks like it would work as a front mounted bar.
Front Sway Bar- P/M IFS 2" Wider than stock - Chassis Engineering Inc.
Front Sway Bar- P/M IFS 2" Wider than stock - Chassis Engineering Inc.
Thread
Thread Starter
Forum
Replies
Last Post
