front axle swap
Thread Starter
|
New User
Joined: Jun 2003
Posts: 1
Likes: 0
front axle swap
Need help w/ two front-end questions: 1) I have a friend who has a solid dana 60 front axle off of a 91' - 98' f-350 4x4. Is it possible to put this axle on my 75' f-250 4x4? 2) I found another solid dana 60 off of a 91 f-350 4x4 w/ auto locking hubs. Will it go on my 75' 4x4 and if so, is it possible to change out the hubs for a pair of manual locking hubs? Please respond ! THANKS.
Last edited by mariae; Jun 30, 2003 at 01:24 AM.
Posting Guru
Joined: Dec 1999
Posts: 2,351
Likes: 0
From: Benton County, MN
front axle swap
The biggest thing to look for is axle perch width. I do not know what the width is on either one of these trucks. If the Dana 60 has the same perch width as your 75 there shouldn't be a problem with getting it bolted in. You may have some driveshaft issues though. As far as yokes matching up.
