Headlight flashers.
Thread Starter
|
Junior User
Joined: Mar 2003
Posts: 90
Likes: 0
Headlight flashers.
Hi all, I have a kit to iconvert to alternating flash headlights on my '93 f250. Which side does the high beam current flow from the switch to the light first, drivers or passengers? I have to cut the wire between the two high beams, which one is it? Has anyone done this conversion before? Your help will be greatly appreciated.
Oh, I know to run these in conjunction with the red strobes, it's the law here in NC.
Oh, I know to run these in conjunction with the red strobes, it's the law here in NC.
Moderator
Joined: Jan 2001
Posts: 57,005
Likes: 2,750
From: Virginia
Headlight flashers.
The wiring from the dimmer switch comes out on the drivers side firewall, and leads down the drivers side inner fender. So one would assume it hits the drivers side bulb first. This is just a guess though. But I don't see why they would run all the way over to the passenger side, and then back to the drivers side where the harness started from.
