When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mike, HIO - I will keep my eyes peeled definitely. Should net a penny or two, ya think?
If not on here, then eBay would love em I'm sure.
YES. I've made some decent pennies.
FYI on shipping... The cheapest is FedEx Ground to a commercial address because commercial routes are "normal". They don't have to make a special trip to a little stead of the county just to deliver one box. And shipping is based on the box dimensions and of course, its weight.
What I am looking for is the square aluminum, Bright polished aluminum that surrounds each headlight and attaches to the grill shell. It also has aluminum trim a the bottoms of the door, front fender, and box. The piece I am missing is on the lower drivers front fender. I would guess that is about 4 inches high by about 6 inches long.. I live in Crete , Nebraska. 68333.
Big truck (500-700) round gauge cluster. These go for good coin on the open market and I'm willing to pay street value so you can have a tidy profit there.
FYI on shipping... The cheapest is FedEx Ground to a commercial address because commercial routes are "normal". They don't have to make a special trip to a little stead of the county just to deliver one box. And shipping is based on the box dimensions and of course, its weight.
Also Gray Hound Bus lines for shipping.
I found out when, I sold my old front grille this was the cheapest way to ship it then. Out of all the big 3 shipping Co's in San Jose Ca.
I use the same shipping carton my new grille came in.
This may still be the cheapest way still to ship. A person could drive to their nearest bus lines and pick it up. So if someone lives near a Bus route it maybe still be the cheapest way for shipping. I don't know if it would have to all be boxed up.
orich
What I am looking for is the square aluminum, Bright polished aluminum that surrounds each headlight and attaches to the grill shell. It also has aluminum trim a the bottoms of the door, front fender, and box. The piece I am missing is on the lower drivers front fender. I would guess that is about 4 inches high by about 6 inches long.. I live in Crete , Nebraska. 68333.
Ohhh! I know what you mean now! Sorry about that.
But that should be a piece of cake to nab for you and send off. I can probably fit it all in one of those USPS flat rate boxes too, so shipping isn't a bear.
Big truck (500-700) round gauge cluster. These go for good coin on the open market and I'm willing to pay street value so you can have a tidy profit there.
Thank you kindly, I will keep my eyes peeled! They keep the 500+ trucks in a different location in the yard, so Im gonna have a bit of am adventure it looks like
The cost was $76 for a boxed 71 grille, save about 20+ bucks back then 2006..
I went to their web site and checked zip to zip then called and made sure...
orich
I have one blank bezel left and I'm going to populate it with aftermarket gauges and use it instead. If it weren't for the electronic speedo in my T5, I would be keeping it in my own truck.
I could use a nice clean short bed think you could pull it and shop it to PA for 250 bucks? Haha damn seriously though why must the west coast be so packed full of these trucks and have great usable parts on top of it all.
I could use a nice clean short bed think you could pull it and shop it to PA for 250 bucks? Haha damn seriously though why must the west coast be so packed full of these trucks and have great usable parts on top of it all.
Because we all love Ford here, and they don't fall apart in the dry *** desert climate lol
But if you wanna come all the way over here and pick it up, we could arrange something.... Hahaha
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.