rear POWER slider
Thread Starter
|
Senior User
Joined: Dec 2000
Posts: 358
Likes: 1
From: Northwest Iowa
rear POWER slider
I have done a search and it sounds like a couple guys may have installed a rear POWER slider, but I am not sure if they did in the 73 to 79 bracket.
Has anybody installed a power rear slider in a 73 to 79 truck??
My arms are to short to reach the rear window of my crewcab.
Has anybody installed a power rear slider in a 73 to 79 truck??
My arms are to short to reach the rear window of my crewcab.
Senior User
Joined: Feb 2001
Posts: 153
Likes: 0
From: Oregon
rear POWER slider
I just installed one in my 79 crew and will be installing one in the 77. I used a CR Lawrence and it is nice. Really quiet and smooth operation and the installation and wiring is a snap.
Bushman
Bushman
Thread Starter
|
Senior User
Joined: Dec 2000
Posts: 358
Likes: 1
From: Northwest Iowa
rear POWER slider
Bushman,
How did you route the wires??
Were you able to use your old gasket seal, or have to get a different one?
Do you remeber what part number?
I found a shop near the town I live in that can get them, but they say they are not for the 73-79. But I went to the manufacturer website and they say they do, but you have to be a dealer. The guy I talked to barely could speak english.
Thanks for the reply.....
How did you route the wires??
Were you able to use your old gasket seal, or have to get a different one?
Do you remeber what part number?
I found a shop near the town I live in that can get them, but they say they are not for the 73-79. But I went to the manufacturer website and they say they do, but you have to be a dealer. The guy I talked to barely could speak english.
Thanks for the reply.....
