Fuel sending unit
Thread Starter
|
Senior User
Joined: Sep 2007
Posts: 152
Likes: 0
Fuel sending unit
The fuel sending unit is bad on my front tank. The one on the back tank works but there is a hole in the bottom of that tank. So I can't use the back tank. Can I take the sending unit off the back tank swap them out? Or are they different?
Senior User
Joined: Sep 2013
Posts: 276
Likes: 0
From: Orange County NY
I'd have to go outside and look but, I think the front tank has a 4" hole and the rear one has a 3" hole.
I've fixed tanks with JB Weld, Bondo, fibreglass or epoxy.
I've fixed senders with tubing and solder, tubing and glue, fuel hose etc.
The fuel level sender can be cleaned and resoldered (if needed) and the float can be replaced with floats from other senders.
I've fixed tanks with JB Weld, Bondo, fibreglass or epoxy.
I've fixed senders with tubing and solder, tubing and glue, fuel hose etc.
The fuel level sender can be cleaned and resoldered (if needed) and the float can be replaced with floats from other senders.
Thread
Thread Starter
Forum
Replies
Last Post
OLDBLUEF250
1973 - 1979 F-100 & Larger F-Series Trucks
21
Jun 20, 2016 09:30 AM
wdhille
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
18
Jun 22, 2010 03:06 PM
doc54
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
Jun 8, 2008 08:13 PM
olblue76
1973 - 1979 F-100 & Larger F-Series Trucks
3
Feb 6, 2006 10:38 AM
