ESOF problem
Thread Starter
|
Tuned
Joined: Jan 2010
Posts: 302
Likes: 14
ESOF problem
I have a 03 6 liter and the ESOF does not work. The previous owner said he always manually locked the hubs. I diagnosed the problem to the drivers front hub. It will not hold vaccum, the other side does hold vaccum. I replaced the front O ring and the drivers side still will not hold vaccum. I assume there is a rear O ring, but I have no idea of how to access this seal.
Can anyone point me in the right direction to fix my ESOF Please. I found nothing on youtube for the rear seal....unless I need a new hub or there is something I"m not informed about regarding the hubs and/or ESOF.
Thank you!
JB
Can anyone point me in the right direction to fix my ESOF Please. I found nothing on youtube for the rear seal....unless I need a new hub or there is something I"m not informed about regarding the hubs and/or ESOF.
Thank you!
JB
Hotshot
Joined: Apr 2010
Posts: 19,055
Likes: 235
From: Saratoga Springs,UT
Basicaly your going to Follow the Ball Joint repair Procedure until you pull the Axel out the Steering knuckle
03-04 Ball Joint for Leaf Spring Models
https://www.ford-trucks.com/forums/a...3&d=1366315696
03-04 Ball Joint for Leaf Spring Models
https://www.ford-trucks.com/forums/a...3&d=1366315696
Thread Starter
|
Tuned
Joined: Jan 2010
Posts: 302
Likes: 14
Thank you for the detailed infromation!
Um, after reading that, I think I will just leave them as they are and adjust them by hand when needed
Unless there is an underlying problem with my truck in that area...my ball joints are in perfect condition so maybe I can just get a seal kit?
Um, after reading that, I think I will just leave them as they are and adjust them by hand when needed
Unless there is an underlying problem with my truck in that area...my ball joints are in perfect condition so maybe I can just get a seal kit?
Thread
Thread Starter
Forum
Replies
Last Post
id_birdhntr
1999 - 2016 Super Duty
7
Jul 18, 2012 03:44 PM
superduty4x4
1999 - 2003 7.3L Power Stroke Diesel
35
May 16, 2008 11:37 PM
