MLPS Test
Thread Starter
|
Elder User
Joined: Jul 2012
Posts: 553
Likes: 0
From: Raleigh, NC
MLPS Test
I've been looking for over an hour and haven't found the info, although I'm sure it here somewhere.
I need to test the MLPS for a 2000 F150 4.2L 4R70W. The transmission is behind a carbed 5.8L/351W engine with a US Shift transmission controller. Can anyone tell me the pin positions on the MLPS to test resistance? And the ohms according to spec?
Thanks in advance for any help.
Jim
I need to test the MLPS for a 2000 F150 4.2L 4R70W. The transmission is behind a carbed 5.8L/351W engine with a US Shift transmission controller. Can anyone tell me the pin positions on the MLPS to test resistance? And the ohms according to spec?
Thanks in advance for any help.
Jim
Thread Starter
|
Elder User
Joined: Jul 2012
Posts: 553
Likes: 0
From: Raleigh, NC
I believe I know why there's no info on testing the later ('97 up) MLPS. The early one is analog; the later one is digital and rarely fails.
Thought I'd post in case someone else is searching for resistance values for the later MLPS.
Thought I'd post in case someone else is searching for resistance values for the later MLPS.
Thread
Thread Starter
Forum
Replies
Last Post
Big Red
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Jan 1, 2004 01:04 PM
