This questions is probably for Ken Payne, the Webmaster, but feel free to comment.

After looking at the performance gains of the Superchip, I do have a question on the effects of installing the chip after I do my modification. What sort of gains can I expect after I have the chip programmed for (Doug Thorley's headers, K&N FIPK, and Magna Flow exhaust)?

For a stock 460 motor, the gain was about a 10% (25HP and 45 Torque). After the installation of my mods, would I see a 10% increase in HP/TQ based on the higher HP and Torque now my motor makes? Or, would I still see just 25HP/45 torque gain?

Thanks,
Trung

1995 Ford F250
460
E40D
4x4

 

There's a law dimishing returns. Adding two items that give a 10% increase each will result in less than 20% when combined. You'll see more than the standard amount of increase from the chip as you increase the base line horse power but don't count on a consistant gain.

 

Trung, have you already put the headers on! If so how do like them.
Jason

 

Dear rusvd,

No, I have not put on headers yet.

Trung