Autoenginuity questions.
Thread Starter
|
Elder User
Joined: Jan 2011
Posts: 951
Likes: 2
From: Center, Texas
Autoenginuity questions.
Just got AE on Friday and it helped me obtain information that helped the guys on here fix my issue. I found out how to do the cylinder balance test or whatever it was called but what are some other "cool" tests you can do or how do you do them. I know it will do a ton of stuff but I just dont know how to use it. I also hooked it up to my Excursion V10 and did some test and the engine revved through different rpm levels then it came back and said everything was ok but I have no idea what it did. The manual is so so but is not as straight forward as I would have liked. What are some powerstroke exclusive stuff I can do with it. Thanks.
Post Fiend
Joined: May 2009
Posts: 5,470
Likes: 3
From: Pea Ridge, AR
With the test you did on the V10 it sounds like one of the KOER self tests(Usually asks for user inputs, such as press cruise, cycle OD 4X4, etc). I actually don't have AE, but it uses many of the same terminologies. BUZZ tests, Cylinder Contribution Tests, VGT tests, etc... are some of the tests that can be performed on the diesels.
Here is a decent guide, I realize this is pointed towards the 7.3 but there could be some added value there as well.
https://sites.google.com/site/woodnt.../autoenginuity
Here is a decent guide, I realize this is pointed towards the 7.3 but there could be some added value there as well.
https://sites.google.com/site/woodnt.../autoenginuity
Thread
Thread Starter
Forum
Replies
Last Post
Oldanvilyoungsmith
1999 - 2003 7.3L Power Stroke Diesel
6
Jun 4, 2023 02:02 PM
