Analyzer Computer Controlled Dwell update
Thread Starter
|
Fleet Owner
Joined: Aug 2005
Posts: 23,668
Likes: 301
From: Easton,Ks
Analyzer Computer Controlled Dwell update
Does anyone know what changes that was done in the update to the TFI-IV Intermittent Analyzer (Rotunda 007-00035) for the Computer Controlled Dwell update for 1994 and newer trucks?
If so do you have a diagram of the wiring changes that were made?
From the Ford shop manual:
TFI-IV Intermittent Analyzer (Rotunda 007-00035). Necessary for diagnosis of intermittent distributor ignition system faults. Step-by-step diagnostic procedures included. The TFI-IV Intermittent Analyzer can not be used with ICMs that have Computer Controlled Dwell (CCD) unless a CCD update has been added to the analyzer or a TFI-IV Intermittent Analyzer (Rotunda 007-00035) which has a CCD compatible label on the tester is used.
If so do you have a diagram of the wiring changes that were made?
From the Ford shop manual:
TFI-IV Intermittent Analyzer (Rotunda 007-00035). Necessary for diagnosis of intermittent distributor ignition system faults. Step-by-step diagnostic procedures included. The TFI-IV Intermittent Analyzer can not be used with ICMs that have Computer Controlled Dwell (CCD) unless a CCD update has been added to the analyzer or a TFI-IV Intermittent Analyzer (Rotunda 007-00035) which has a CCD compatible label on the tester is used.
Thread
Thread Starter
Forum
Replies
Last Post
