Mud flap/ flares
Thread Starter
|
Fleet Owner
Joined: May 2009
Posts: 21,437
Likes: 76
From: Gilbert, PA
Mud flap/ flares
Some people have inquired about the mud flaps I have on several of my trucks. I am getting some mud flap/flare made up since Ford is having issues with their supplier. I know these would have to go thru a vendor to sell, I just would want to see if it would be worth getting 50 or so pair made? Also I am have some made in dually width as well.
The single wheel ones are 36" long and 12" wide and will look JUST like these(mounting holes will need to be drilled in fender and mud flap) The bottom of the flap is 12" wide and about 10" tall. It then tapers down to 4" on the slender section.
And on truck
Front only
Dually ones would be similar, BUT the bottom would be 24" wide and the bottom would be 14" tall.
I dont know what a Vendor would charge, but I am guessing in the 40-50 range for a pair
The single wheel ones are 36" long and 12" wide and will look JUST like these(mounting holes will need to be drilled in fender and mud flap) The bottom of the flap is 12" wide and about 10" tall. It then tapers down to 4" on the slender section.
And on truck
Front only
Dually ones would be similar, BUT the bottom would be 24" wide and the bottom would be 14" tall.
I dont know what a Vendor would charge, but I am guessing in the 40-50 range for a pair
FTE Leadership Emeritus
Joined: Sep 2000
Posts: 23,174
Likes: 1,678
From: Stephensville WI
Thread Starter
|
Fleet Owner
Joined: May 2009
Posts: 21,437
Likes: 76
From: Gilbert, PA
Thread
Thread Starter
Forum
Replies
Last Post
1994F2507.3L
1994.5 - 1997 7.3L Power Stroke Diesel
7
Mar 12, 2019 11:12 AM
