Pops' Ride
Thread Starter
|
Junior User
Joined: Oct 2012
Posts: 71
Likes: 0
From: Joliet, IL
Pops' Ride
I have two quick questions for you guys. My father has on 04 f350 cc srw king ranch. Now I am not all to familiar with the 6.0L, but I know that he has taken extremely great care of this truck since he bought it new. Today after changing the oil on mine. I went to the garage and with it being at or below freezing for the past week, I just wanted to start it up and let it warm up. There was the usual smoke when its cold, but after returning from a drive to warm it up. I noticed it was still smoking as I pulled it into the garage which seemed unusual to me. Any ideas?
Secondly, there has been an issue with the turn signals after using the hazards. The turn signals do not "blink" and just stay lit up after I used the hazards today, which has happened quite often. And the only way to fix the issue is to turn the truck off and restart. So I'm thinking its somethhing in the CPU.
Lastly, I have had friends with the 6.0L who swear by using the Lucas Oil Stabilizer. Now I will never use it for my 7.3L with the HPOP. just curious on what you guys think for the 6.0
Secondly, there has been an issue with the turn signals after using the hazards. The turn signals do not "blink" and just stay lit up after I used the hazards today, which has happened quite often. And the only way to fix the issue is to turn the truck off and restart. So I'm thinking its somethhing in the CPU.
Lastly, I have had friends with the 6.0L who swear by using the Lucas Oil Stabilizer. Now I will never use it for my 7.3L with the HPOP. just curious on what you guys think for the 6.0
Thread
Thread Starter
Forum
Replies
Last Post
1957F100
6.0L Power Stroke Diesel
15
Nov 23, 2011 06:00 AM
mgazak
Explorer, Sport Trac, Mountaineer & Aviator
1
Sep 7, 2002 07:44 PM
